Polar Loop Bedienungsanleitung PDF herunterladen (Seite 19)

7. IMPORTANT INFORMATION

Charging Polar Loop

When fully charged, Polar Loop can hold its charge up to six days, depending on the usage.

Polar Loop has an internal, rechargable battery. Use the USB cable included in the product set to charge

your Polar Loop via the USB connector on your computer. If you want to plug the USB connector to a wall

outlet, use a USB power adapter (not included in the sales package).

If the battery has drained and the display doesn't light up after plugging in, it may take up to 20 seconds for the

charging animation to appear.

It takes approximately 90 minutes to fully charge the battery.

If you use an AC adapter, make sure that the adapter is marked with "output 5Vdc 0.5A - 2A max". Only

use an AC adapter which is adequately safety approved (marked with "LPS", "Limited Power Supply" or "UL

listed").

The display will rotate between the charging symbol and the battery level percentage as it charges to

100%.

Caring for Your Polar Loop

Clean with a mild soap and water solution, dry with towel. Never use alcohol or any abrasive material

(steel wool or cleaning chemicals). Keep in a cool and dry place. Do not store in a damp environment, in

non-breathable material such as a plastic bag or a sports bag. Do not expose to direct sunlight for

extended periods.

If your product doesn’t charge properly, or if it doesn’t connect to FlowSync, it could be because the

charging area on the back of the product is not clean enough. Gently remove any dust, hair or dirt

accumulated on the charging pins. Use a dry cleaning cloth - something you'd use with glasses. You can

also use e.g. a toothbrush to reach all that hard-to-remove dirt in the cavity.

Do NOT use alcohol, cleaning chemicals, or any abrasive material such as steel wool.

Water-resistance

Polar Loop is water-resistant up to 20 meters. You can wear it while bathing and swimming.

Updating Polar Loop

If new updates for Polar Loop are available, Polar FlowSync will automatically prompt you to update your

device.

Polar FlowSync will synchronize all your data before resetting and updating the activity tracker. After the

update, your settings will be synchronized back to the activity tracker.

Resetting Polar Loop

If you need to reset your Polar Loop, connect it to your computer and perform a Factory Reset under

Settings in Polar FlowSync.

Factory reset empties all the data in the activity tracker and makes it possible to take it into use as new.

ENGLISH

Important Information 19

1 2 ... 14 15 16 17 18 19 20 21

Keine Kommentare

Polar Loop Bedienungsanleitung Seite 19